OPTIMASS 3400

Coriolis mass flowmeter for low flow and dosing applications

  • High accuracy (±0.1%) for gases and liquids >0.3 kg/h / 0.01 lb/min; maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
  • Standard pressure rating up to 300 bar / 4351 psi
  • Flange: DN15 / 1/2"; also thread and clamp connections
  • 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

OPTIMASS 3400

Coriolis mass flowmeter for low flow and dosing applications

  • High accuracy (±0.1%) for gases and liquids >0.3 kg/h / 0.01 lb/min; maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
  • Standard pressure rating up to 300 bar / 4351 psi
  • Flange: DN15 / 1/2"; also thread and clamp connections
  • 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

Overview

The OPTIMASS 3400 is a cost-effective Coriolis mass flowmeter for accurate flow measurement of liquids and gases in a variety of demanding low flow and dosing applications (from 0.3 kg/h or 0.01 lb/min upwards). The OPTIMASS 3400 features Entrained Gas Management (EGMTM) for liquid applications and thus maintains operation even with entrained gas of up to 100%.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Single Z-tube design
  • Entrained Gas Management (EGMTM): maintains operation with air or gas entrainments in the medium
  • Device commissioning, verification, diagnostics and monitoring via a secure wireless Bluetooth® connection (<20 m / 65.6 ft)
  • Fast and completely digital signal processing
  • High accuracy: ±0.1% of MV for liquids / ±0.5% of MV for gases
  • Extensive sensor and process diagnostics (incl. NE 107)
  • Integrated temperature measurement
  • 3 sizes in a single footprint
  • Optional PED approved secondary pressure containment up to 30 barg / 435 psig
  • Many options (heat tracing, purge port etc.)
  • Easily drained and easy to clean
  • No crosstalk: resistant to installation and process effects
  • On-site verification of flowmeter with OPTICHECK service tool

Related products

MFC 400

Coriolis mass flow converter for combination with OPTIMASS Coriolis mass flow sensors

  • Compact and remote field housing
  • With extensive diagnostics (NE107) and Entrained Gas Management (EGM™) for advanced requirements
  • 4-wire, 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®
  • Secure wireless access via Bluetooth® or remotely via HART® even in safety-related applications

OPTIMASS 3000

Coriolis mass flow sensor for combination with MFC 010 and MFC 400 signal converters

  • Single Z-tube design
  • Connection sizes: DN15 / ½"
  • Tube material: Stainless steel or Hastelloy®
Email
Contact